2170 Electronics and gas fill issues.

Discussion of Blazer's line of Bay boats.

Re: 2170 Electronics and gas fill issues.

Postby Mentalic » Sun Apr 13, 2008 10:10 pm

Yep the tank is in the rear, starts around the console, runs to the hatch under the leaning post.

I removed the hatch once to just have a look.. Turns out the fill and vent lines are at the very rear of the tank so if the boat is bow up there both liquid lines.
Blazer Bay 2170, Yamaha F150, Minkota autopilot, Garman 178c
Image
Mentalic
 
Posts: 20
Joined: Tue Dec 25, 2007 5:34 pm

Re: 2170 Electronics and gas fill issues.

Postby MTH4954 » Mon Apr 14, 2008 6:07 pm

The dealer shortened the vent line, and it helped tremendously. They tried to fix the GPS problem, but it still cuts off constantly. If anyone knows anything about the Garmin 498 GPS/Sonar, I sure could use some direction here. As I said in the original post, the unit completely loses power when I go through the slightest chop. At first, the dealer thought the inline fuse was the problem, but they cut it out and it's still cutting off. Thanks again.
MTH4954
 
Posts: 14
Joined: Wed Apr 09, 2008 11:33 am

Re: 2170 Electronics and gas fill issues.

Postby dyepac » Mon Apr 14, 2008 8:12 pm

the one thing i would try is.... to run a cable to the battery from the unit and have no splices and see what happens,then work from there..process of elimitations.is it a external ant or internal ant....
Image
2220 pro,yammie 225 vmax...seafoam green
dyepac
 
Posts: 167
Joined: Mon Dec 03, 2007 9:07 pm

Re: 2170 Electronics and gas fill issues.

Postby MTH4954 » Mon Apr 14, 2008 9:18 pm

External.
MTH4954
 
Posts: 14
Joined: Wed Apr 09, 2008 11:33 am

Previous

Return to Bay Boats

Who is online

Users browsing this forum: No registered users and 2 guests

cron