splash well access cover leaking

Discussion of Blazer's line of Bay boats.

splash well access cover leaking

Postby stms26 » Tue Aug 10, 2010 9:07 pm

The splash well access cover in my 2220 fisherman leaks a lot. It leaks right on my fuel filter housing causing it and the filter to corrode. Has anyone else had this problem and what did you do to correct it? I looked at the “o” ring and it looks ok. I was thinking of trying a larger diameter and see if it would make a difference but I am not sure where to get one. Any help is greatly appreciated.
stms26
 
Posts: 28
Joined: Tue Jul 22, 2008 11:18 am
Location: Cut Off, LA

Re: splash well access cover leaking

Postby JRinBR » Wed Aug 18, 2010 9:53 am

had the same problem with my 2020, i moved the filter asmbly to the batt compart. also had problems with the molded lips under the access with water over-flowing into the compartments. fixed that by installing some 90 degree 1/4 npt to 3/8 barb fittings and some 3/8 tubing and routing it to the bilge.
JRinBR
 
Posts: 1
Joined: Tue Jul 20, 2010 2:55 pm


Return to Bay Boats

Who is online

Users browsing this forum: No registered users and 3 guests