Need help with chimewalk

Discussion of Blazer's line of Bass boats.

Need help with chimewalk

Postby Bear51 » Fri Aug 28, 2009 9:36 am

Ihave a 2008 190 prov with 200 opti 25 temp prop. Can someone tell me where to start with mtor height and how much of the chimewalk that I can expect to be able to adjust out and what speed I should expect to see :)
Bear51
 
Posts: 6
Joined: Wed Aug 26, 2009 10:47 am

Re: Need help with chimewalk

Postby Rebel1 » Sun Aug 30, 2009 5:05 pm

You need to start at about 1 3/4in. below the pad and come up till you lose water pressure or gain rpm but lose speed. This combo should see about 73-75 depending on load, set-up, and driver ability.
Jason Carnley
08' 202 DC/ Yamaha 300 HDPI
Turbo Props Pro Staff
Rebel1
 
Posts: 53
Joined: Fri Nov 30, 2007 8:06 pm
Location: Gonzales, LA

Re: Need help with chimewalk

Postby Bear51 » Mon Aug 31, 2009 7:05 am

At what point on the motor do I take my measurement at the point on the nosecone or somewhere else.
Bear51
 
Posts: 6
Joined: Wed Aug 26, 2009 10:47 am

Re: Need help with chimewalk

Postby blazerbrian » Mon Aug 31, 2009 10:00 am

Take your measurement at the center of the prop shaft 8-)
blazerbrian
 
Posts: 17
Joined: Wed May 20, 2009 9:56 am
Location: Wing AL- aka Butterbean


Return to Bass Boats

Who is online

Users browsing this forum: No registered users and 3 guests