2006 210 with 225 pro xs set up

Discussion of Blazer's line of Bass boats.

2006 210 with 225 pro xs set up

Postby bjmoss » Tue Sep 07, 2010 7:30 pm

I have just bought a 2006 210 with a 225 pro xs and was just wondering the best set up for it. It has a 10in bobs flats jack. It has the mercury smart craft gagues. i have the jack plate gague set at 1line past 1. (the numbers go form 1 to 6) and i had the trim up to 7.5 I Got it up to 71 then it started walking real bad. can any one help me out?
running a 27 tempest plus
Posts: 2
Joined: Tue Sep 07, 2010 7:21 pm

Re: 2006 210 with 225 pro xs set up

Postby blazerbrian » Mon Oct 18, 2010 1:17 pm

Measure your prop shaft height to pad. It may be to low. I would think on a 21ft boat 1 1/2" below pad might be a good place to start. Also make sure your load is balanced.
Posts: 17
Joined: Wed May 20, 2009 9:56 am
Location: Wing AL- aka Butterbean

Return to Bass Boats

Who is online

Users browsing this forum: No registered users and 1 guest